">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 13 Next »

Cut Pattern: Optimized

  • Set Optimized from the Cut Pattern dropdown control to cut tiled mats bi-directionally, which will zig-zag back and forth when cutting the outside on tiled mats on the CMC Z1 and Z (9000z).

  • Select Optimized from the Cut Pattern dropdown control.

  • Click OK.

  • It will cut the outsides of tiled mats in a bi-directional, zig-zag fashion.

See Also: Stairstep vs. Optimized vs. Unidirectional for information on the cutting differences between the Cut Patterns.

Defaults: Set the Default for Cutting the Outside 

The default setting for Cutting the Outside can be set in the Admin > Editor section.

Defaults: Set the Default for 90 Degree Outside Cut

The default setting for 90 Degree Outside can be set in the Admin > Cutting section.

Defaults: Set the Default for the Advanced Options

The default setting for the Advanced Options can be set in the Admin > Cutting section.

Defaults: Set the Default for the Cut Pattern

The default setting for the Cut Mode can be set in the Admin > Cutting section. 

  • No labels