">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 16 Next »

Box Templates and Dimensions

  • Use the Box Dimensions section to select the Box Template and enter the size and thickness.

Box Thumbnail

  • A thumbnail of the current Box Template is displayed above the box template selection dropdown control.

  • Select the desired box template from the Box Template dropdown control.

  • The thumbnail for the selected box template is displayed.

Box Template

  • There are several box Templates available.

  • Select the desired box template from the Box Template dropdown control.

Box Dimensions

  • When the desired box template is selected, the fields pertinent for the selected template will be displayed.

  • Enter in the desired Sizes, such as Length, Width, Depth and Thickness of the box. 

    • The example box displayed here only has Width because it controls both the Width and Height because it is a square corner protector.

Box Depth

  • Enter the Depth of the box to be made in the Depth field.

Box Thickness

  • The thickness field controls which Creasing Tool is used to create the creases when cutting the box.

  • The software will also calculate where the fold lines should be based on the thickness and the box template selected. 

  • Enter the thickness for the material the box is being cut from in the Thickness field.

  • Default Settings: See Admin > Editor for the default Thickness and Tool Threshold settings for the Box/Crease Cartridge.

Thickness: Deboss

  • Enter the thickness of 3/32” and below for the material the box is being cut from in the Thickness field to use the Deboss cartridge to create fold lines.

  • Default Settings: See Admin > Editor for the default Thickness and Tool Threshold settings for the Box/Crease Cartridge.

 Deboss Definition

The Deboss cartridge stylus presses onto the surface of the matboard to create a subtle design.

There are three Deboss stylus sizes: Wide, Medium, Thin.

In addition to Template Shapes, you can also Deboss CutArts, LetterMats and TTFs.

See: Add Deboss Opening Function

See: Deboss Configurations

See: Deboss Thin Definition

See: Deboss Medium Definition

See: Deboss Wide Definition

Thickness: Crease

  • Enter the thickness of 1/8” and above for the material the box is being cut from in the Thickness field to use the Crease cartridge to create fold lines

  • Default Settings: See Admin > Editor for the default Thickness and Tool Threshold settings for the Box/Crease Cartridge.

 Crease Definition

The Crease Cartridge is used to apply Crease marks that are used to assist in folding the thicker finished Box.

See: Add Crease Opening Function

See: Crease Cartridge Configurations

Override Thickness Auto-Adjust

  • Optionally, click the Override Thickness Auto-Adjust checkbox to retain the currently selected tool regardless of the thickness value entered.

  • No labels