">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 16 Next »

Continuous Layer On

  • Click the Continuous Layer toggle On to cut the Current Layer Continuously without rolling over to the next layer for the CMC Z1, Z (9000z), 9000, and 8000.

  • Click the Continuous Layer toggle On. 

  • The system will not roll over to the next Layer after cutting the current Layer.

  • It will stay on the current Layer until the user manually selects a different layer or turns off Continuous Layer.

 Continuous Layer Definition

The Continuous Layer will keep cutting the Current layer without rolling over to the next layer. It will stay on the current Layer until the user manually selects a different layer or turns off Continuous Layer.

Continuous Layer Off 

  • Click the Continuous Layer toggle Off to allow the system to roll over to the next Layer after cutting the current Layer.

  • Click the Continuous Layer toggle Off. 

  • The system will automatically roll over to the next Layer after cutting the current Layer.

Defaults: Set the Default for Continuous Layer

 Default Setting for Continuous Layer

Set the default setting for using the Continuous Layer feature under Admin > Cutting.

It will use this default setting on the Cut Preview screen. 

See Also: Edit Menu: Continuous Layer

  • Optionally, you can use the Edit menu to cut the current layer exclusively without rolling over to the next layer.

  • Click on the design to select it.

  • Click Edit > Continuous Layer to cut the current layer continuously.

  • No labels