/
Horizontal Belt Tension Adjustment: All Current CMC Models

Horizontal Belt Tension Adjustment: All Current CMC Models

Owned by dani.simmonds
Last updated: Jun 04, 2024
2 min read

Adjusting the Horizontal Belt Tension

Adjusting the Horizontal Belt Tension

  • Reset the horizontal belt tension if the vertical belt feels loose.

  • Click Reset Motors to turn off power to the motors.

Click Reset Motors Button

  • Move the Gantry all the way to the left edge of the Board.

  • Loosen one full turn only the lower 3/16” Allen Belt Tension Screw from the right bottom side of the lower Rail marked with a red dot.

Loosen Allen Belt Tensioner Screw That’s Located on the Right Bottom Side of the Lower Rail One Turn

 

Related content

Drive Belt Position Fine-Tune: All Current CMC Models
Drive Belt Position Fine-Tune: All Current CMC Models
Knowledge Base
More like this
Vertical Belt Tension Adjustment: CMC 8000, 8500 Series and the 8000RC
Vertical Belt Tension Adjustment: CMC 8000, 8500 Series and the 8000RC
Knowledge Base
More like this
Vertical Belt Tension Adjustment: CMC 9000, Z Series and the 8000+
Vertical Belt Tension Adjustment: CMC 9000, Z Series and the 8000+
Knowledge Base
More like this
Drive Belt Position Alignment: All Current CMC Models
Drive Belt Position Alignment: All Current CMC Models
Knowledge Base
More like this
Horizontal Tension Adjustment
Horizontal Tension Adjustment
Knowledge Base
More like this
Vertical Belt Pulley Replacement Instructions: All Current CMC Models
Vertical Belt Pulley Replacement Instructions: All Current CMC Models
Knowledge Base
More like this