/
Head Wheels

For AI-powered technical support, check out our new AI chatbot Wizards AI chatbot

Head Wheels

  • This section defines and provides resolutions for common hardware issues for the Head Wheels on which the Head rolls along on the Gantry.

  • Head Wheels Definition: The Head Wheels of the Head, which is attached to the Head Grabber Arm on the Gantry, travel within the Gantry Grooves while the Vertical Belt drives the Head’s Vertical movement to ensure precise cuts.

Usage:

  • The Head Wheels of the Head, which is attached to the Head Grabber Arm on the Gantry, travel within the Gantry Grooves while the Vertical Belt drives the Head’s Vertical movement to ensure precise cuts.

  • The Head Wheels must be securely tightened to prevent wavy cuts.

Adjusting the Head Wheels
GraspHeadZ1UP2024800.png
Make Sure There is no Wobbly Movement of the Head on the Gantry

Head Wheels Connections and Controls:

  • The Head Wheels control how smoothly the Head travels vertically along the Gantry. The Head Wheels must be securely tightened to prevent wavy cuts.

  • The Vertical Belt drives the Head Grabber Arm, which guides the Head Wheels as they move Vertically within the Gantry Grooves.

  • The Head Wheels must be securely tightened to prevent wavy cuts.

  • The Head Wheels are spring-loaded and roll along the Gantry Grooves.

The ECU/Driver Pack Controls:

The Gantry and Air Valve Assembly Control:

Troubleshooting: