/
Dense Material: Cutting Default Setting

Dense Material: Cutting Default Setting

Owned by dani.simmonds
Last updated: Nov 22, 2024
1 min read

Dense Material: Cutting Default Setting

Dense Material: Cutting Default Setting

  • Select the cutting speed percentage from the Default Speed % to be used when cutting Dense Material.

    • For example, selecting 50% will make the CMC cut at 50% of the full speed when cutting with the Dense Material setting.

  • Set the desired cut speed percentage to be used for cutting Dense Material in the Default Speed % field.

Default Settings for the Speed to Cut Dense Material

Related Links

Related Links