Check out our new How To section at: How To...

Drop has a Swoop

Owned by dani.simmonds
Last updated: Aug 16, 2024
2 min read

Drop has a Swoop 

Drop has a Swoop 

  • If the Drop has a Swoop, Increase the Rotation.

  • For Additional Information: See Troubleshooting Utility for information on adjusting for a Swoop or Flare in a Non-Oval.

A Swoop in a Drop is where the corners Curve Inward toward the drop.

If the Drop has a Swoop, Increase the Rotation.

The Rotation controls for Swoops and Flares in Openings.

Swoop on a Drop
Rotation for Drops

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.