V-Groove Outside Cut has a Swoop

A Swoop in the Outside cut of the V-Groove is where the corners Curve Inward toward the V-Groove.

If the Outside cut of the V-Groove has a Swoop, Decrease the Outside Rotation.

The Rotation on V-Grooves controls for Swoops or Flares on V-Grooves.

Open

Swoop on the Outer Cut of a V-Groove

Open

Outside Rotation for V-Grooves

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.