Reverse Bevel Open V-Groove Creation

These instructions will show you how to edit the standard Closed V-Groove and change it into a Reverse Bevel Open V-Groove.

Click New Mat Design on the FrameShop Main Page.

Click Cancel on the New Openings Screen.

On the Openings Tab, click the Add V-Groove button to place the V-Groove onto the Editor.

• If you have an object selected, the V-Groove Offset screen will open.

• Enter the Distance to place the V-Groove and click OK.

Click on the Properties Tab to edit it.

Enter the desired size for the V-Groove.

On the VG Width field, enter any Value above Zero(0).

• Any value over Zero (0) is an Open V-Groove.

• The value of Zero (0) is a Closed V-Groove.