Reverse Bevel Open V-Groove Definition
Reverse Bevel Open V-Groove Definition | |
---|---|
The Reverse Bevel Open V-Groove involves two symmetrical cuts: one in the fallout and a corresponding cut in the matboard, both forming a mirrored arrangement a specified distance apart. The matboard core is not visible but the lower layer matboard color is visible from the front. First Cut: Cuts the Interior cut into the Fallout Clockwise: Reverse Bevel Drop*. Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise: Reverse Bevel Opening. *The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within Designer. Select Reverse Drop or Reverse Drop-Front of Mat from the Current Bevel Type dropdown control to edit the interior cut configuration. Select Reverse Bevel or Reverse Bevel-Front of Mat from the Current Bevel Type dropdown control to edit the exterior cut configuration. Reverse Bevel Open V-Groove Reverse Bevel Drop Configurations See: 45 Degree Reverse Bevel Drop Configurations See: 45 Degree Reverse Bevel Opening Configurations See: 45 Degree Plus Reverse Bevel Drop Configurations See: 45 Degree Plus Reverse Bevel Opening Configurations See: 45 Degree Front Reverse Bevel Drop Configurations See: 45 Degree Front Reverse Bevel Opening Configurations
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |