45 Degree Plus Normal Bevel Closed V-Groove Definition
45°+ Normal Bevel Closed V-Groove Definition | |
|---|---|
A 45°+ Normal Bevel Closed V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement in the thicker matboard. The matboard is sliced halfway through the thickness and the core is visible from the front. The initial plunge position is determined by the bevel type. A 45°+ Normal Bevel Closed V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement in the thicker matboard. The matboard is sliced halfway through the thickness and the core is visible from the front. The initial plunge position is determined by the bevel type. First Cut: Cuts the Interior cut into the Fallout Clockwise. Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise. Select V-Groove from the Current Bevel Type dropdown control to edit this configuration.  45 Degree Plus Normal Bevel Closed V-Groove and Cartridge  45°+ Normal Bevel Closed V-Groove Configurations See: 45 Degree Plus Normal Bevel Closed V-Groove Configurations When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
|