52 Degree Cartridge Definition
52° Cartridge Definition | |
---|---|
The 52° Cartridge cuts the bevel angle on the matboard at 52°. This angle can be displayed on either the front or the back of the mat or drop depending upon the selected Bevel Type. The initial plunge position is determined by the bevel type. The 52° Cartridge cuts the matboard surface with the blade angled at 52°. This angle can be displayed on either the front or the back of the mat or drop depending upon the selected Bevel Type. The initial plunge position is determined by the bevel type. The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. Select [Bevel Type] or [Bevel Type]-Front of Mat from the Current Bevel Type dropdown control to edit this configuration. 52° Normal Bevel Opening and Cartridge 52° Cartridge Configurations See: 52 Degree Normal Bevel Opening Definition See: 52 Degree Reverse Bevel Opening Definition See: 52 Degree Normal Bevel Drop Definition See: 52 Degree Reverse Bevel Drop Definition See: 52 Degree Outside Definition See: 52 Degree Normal Bevel Closed V-Groove Definition When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
|