/
Lesson Four: Name Plate V-Groove
Lesson Four: Name Plate V-Groove
Make a Name Plate V-Groove | |
---|---|
| Name Plate V-Groove Design
|
Design Opening in FrameShop | |
---|---|
Layer Definition | Make Sure the Layer Direction is Set to Bottom Up |
Templates Definition | |
Parameters | |
Positioning Toggle Definition |
Place a Guide | |
---|---|
Guide | |
Place a V-Groove | |
---|---|
V-Groove | |
Bring Design into Trace | |
---|---|
Break Intersection | |
---|---|
Break Tool Definition | |
Delete Object | |
---|---|
Join Segments | |
---|---|
Join Tool Definition | |
Trace the Design | |
---|---|
Traced | |
45 Degree Normal Bevel Opening | |
Traced |
Save, Cut | |
---|---|
CutArt™ Definition |
If the CutArt Flows Off the Mat: | |
---|---|
Dynamic Outsides Border | |
Comparison | |
---|---|
You can see how much we changed the design when you compare it to the original version. | |
Default Settings |
---|
, multiple selections available,
Related content
Trace Lesson Four: Name Plate V-Groove
Trace Lesson Four: Name Plate V-Groove
More like this
Lesson Five: Free-Floating V-Groove
Lesson Five: Free-Floating V-Groove
More like this
PathTrace Lesson Four: Name Plate V-Groove
PathTrace Lesson Four: Name Plate V-Groove
More like this
Trace Lesson Five: Free-Floating V-Groove
Trace Lesson Five: Free-Floating V-Groove
More like this
V-Groove on a Lower Layer
V-Groove on a Lower Layer
More like this
V-Groove: Add a V-Groove With an Object Selected
V-Groove: Add a V-Groove With an Object Selected
More like this