/
Initial Calibration Before Debossing

Initial Calibration Before Debossing

Owned by dani.simmonds
Last updated: yesterday at 10:37 pm
1 min read

  • These instructions will show how to calibrate the Debossing Tool Cartridges.

  • As the blade depth knob is turned deeper, more pressure is applied and the Debossing will be more pronounced. 

Contents:

Find the Optimum Blade Depth for Debossing

Related content

Before Debossing - Initial Calibration: CMC Z1, Z (9000z), 9000, 8500e SBT, 8500e, 8500 and 8000
Before Debossing - Initial Calibration: CMC Z1, Z (9000z), 9000, 8500e SBT, 8500e, 8500 and 8000
FrameShop 4x
More like this
Initial Calibration for Debossing: MatDesigner
Initial Calibration for Debossing: MatDesigner
Knowledge Base
More like this
Debossing Calibration: MatDesigner
Debossing Calibration: MatDesigner
Knowledge Base
More like this
Enter Deboss Tool Cartridge Depth Setting: CMC Z1, Z (9000z), 9000, 8500e SBT, 8500e, 8500 and 8000
Enter Deboss Tool Cartridge Depth Setting: CMC Z1, Z (9000z), 9000, 8500e SBT, 8500e, 8500 and 8000
FrameShop 4x
More like this
Enter the Deboss Depth Setting
Enter the Deboss Depth Setting
FrameShop 7x
More like this
Find the Optimum Deboss Depth Setting: CMC Z1, Z (9000z), 9000, 8500e SBT, 8500e, 8500 and 8000
Find the Optimum Deboss Depth Setting: CMC Z1, Z (9000z), 9000, 8500e SBT, 8500e, 8500 and 8000
FrameShop 4x
More like this