/
Box 1: Telescoping Lid Box: FrameShop Box Editor

This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw


Box 1: Telescoping Lid Box: FrameShop Box Editor

Telescoping Lid Box

Telescoping Lid Box

This box consists of a base and a separate lid. The base and lid can be cut separately.

Cut out the lid and base of the box at the desired dimension.

Cut Out the Lid and the Base

Fold the lid section along the creasing edges.

Fold the Lid Section Along the Creasing Edges

Fold in the inner flaps of the lid and attach them to the sides with hot glue.

Fold the edges of the lid toward the inside of the box, folding them over the flaps. 

Secure the folded edges of the lid with hot glue. 

Fold the base section along the creasing edges.

Fold in the inner flaps of the base and attach them to the ends with hot glue.

Fold in the inner flaps of the base and attach them to the sides with hot glue.

Fold the edges of the base toward the inside of the box, folding them over the flaps.

Secure the folded edges of the base with hot glue.

The lid and base are now assembled.

The lid fits over the base to complete the box.

Related content

Box 1: Telescoping Lid Box
Box 1: Telescoping Lid Box
More like this
Box 3: Tuck Top Box: FrameShop Box Editor
Box 3: Tuck Top Box: FrameShop Box Editor
More like this
Box 5: Storage Box: FrameShop Box Editor
Box 5: Storage Box: FrameShop Box Editor
More like this
Assembling the Boxes: FrameShop Box Editor
Assembling the Boxes: FrameShop Box Editor
More like this
Box 3: Tuck Top Box
Box 3: Tuck Top Box
More like this
Box 6: Snap Bottom Box: FrameShop Box Editor
Box 6: Snap Bottom Box: FrameShop Box Editor
More like this