This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw


Creasing Tool: FrameShop Box Editor

Creasing Tool

Creasing Tool

The value entered into the Thickness field dictates which creasing tool will be used to create the creases when cutting the box: either the Creasing Tool or the Deboss Tool.

Enter the thickness of the material the box is being cut from in the Thickness field. 

This controls the type of Creasing tool used to create the creases when cutting the box: either the Crease Tool or the Deboss Tool.

The software will also calculate where the fold lines should be based on the thickness and the box template selected.

Box Material Thickness for Creasing

For thicknesses 3/32" and below, it will use the Deboss Cartridge.

Box Material Thickness for Deboss

For thicknesses 1/8" and above, it will use the Creasing Tool.

Click the Override Thickness Auto-Adjust checkbox to retain the currently selected tool regardless of the thickness value entered.

Optionally, click the Creasing Tool icon to manually select either Deboss or Perforate from the dropdown control.