This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Draw Section: FrameShop Trace Editor

Owned by dani.simmonds
Last updated: May 18, 2021
2 min read

Draw

Draw

The Draw section contains a variety of drawing tools to draw your design. Click the Radio button next to Draw to activate the Draw section. 

NOTE: Hit F6 to toggle between the Draw and Edit sections.

Snapping to Control Points

Select this topic to see information on snapping to the control points of a nearby object or setting a point under the cursor when drawing or editing an object.

Line 

Select this topic to see information on the Line tool which draws a two-point line.

Arc 

Select this topic to see information on the Arc tool which draws a three-point arc.

Curve 

Select this topic to see information on the Curve tool which draws a four-point bezier curve.

Oval 

Select this topic to see information on the Oval tool which draws a two-point oval.

Poly(n) 

Select this topic to see information on the Poly(n) tool which draws a polygon with the selected number of sides.

Star(n)
Select this topic to see information on the Star(n) tool which draws a star with the selected number of sides.Â