This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw


New Openings Screen: FrameShop Design

New Openings Screen: FrameShop Design

New Openings Screen: FrameShop Design

There are three tabs on the new openings screen: Single, Multi and Array. You can use these tabs to quickly add opening(s) to your design. 

You can also click on the Cancel button to go directly to the design screen with a blank mat.

New Openings Screen Single Tab
 
Select this topic to see information on Creating a Single Opening Mat in FrameShop Design. 

New Openings Screen Multi Tab

Select this topic to see information on entering Multiple Openings to Bring into the FrameShop Design Editor to arrange their placement. 

New Openings Screen Array Tab

Select this topic to see information on creating an Array of the Same Opening to Bring into the FrameShop Design Editor in a grid.

Setting Defaults for the New Openings Screen

Setting Defaults for the New Openings Screen

Set the Default Settings for the New Openings Screen

Set the default setting for the New Openings Screen in the Admin > Editor section.

Set the Mat Defaults for the New Openings Screen

Set the Mat Defaults for the New Openings Screen

Set the Mat Defaults for the New Openings Screen in the Admin > Defaults section.