The 45°+ black metal blade cartridge* is designed for cutting thicker matboard, such as 8-ply matboard. Unlike the other cartridges, there is no dropdown cartridge selection for the 45°+ Cartridge on the editor.  The 45°+ Cartridge is designated by the blade depth selected.

*Older systems may have a plastic yellow 45+° cartridge. 

Selecting the 45 Degree Plus Cartridge in the Software by Selecting Thicker Matboard Depth: CMC Z1, Z (9000z) and 9000

Select this topic to see information on Selecting the 45 Degree Plus Cartridge in the Software by Selecting Thicker Matboard Depth.

Air Pressure for Cutting with the 45 Degree Plus Blade Cartridge: CMC Z1, Z (9000z) and 9000 

Select this topic to see information on adjusting the Air Pressure for Cutting with the 45 Degree Plus Blade Cartridge to cut typical matboard or dense matboard material.

Changing the Blade on the 45 Degree Plus Cartridge: CMC Z1, Z (9000z) and 9000

Select this topic to see information on Changing the Blade on the 45 Degree Plus Cartridge.

Changing to the 45 Degree Plus Blade Cartridge: CMC Z1, Z (9000z) and 9000

Select this topic to see information on Changing to the 45 Degree Plus Blade Cartridge.

Editing the 45 Degree Plus Blade Cartridge Configurations: CMC Z1, Z (9000z) and 9000

Select this topic to see information on Editing the 45 Degree Plus Blade Cartridge Configurations.