/
Blade Rotation: FrameShop Definition
This FrameShop Online Help System is for an older Version of FrameShop.
The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw
If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.
What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ
FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw
Blade Rotation: FrameShop Definition
- dani.simmonds
Owned by dani.simmonds
Blade Rotation Definition | |
|---|---|
If the plane of the blade was exactly parallel to the cut, the beginning of every cut would curve. To compensate, the foot block is rotated so that the beginning of the cut is straight. Matboard density can also effects these curves, and the user may need a higher rotation setting for more dense matboards than for softer ones. |  |
, multiple selections available,
Related content
Rotation on Outside: FrameShop Configurations Screen
Rotation on Outside: FrameShop Configurations Screen
More like this
Rotation on the Cut Preview
Rotation on the Cut Preview
More like this
Rotation on Openings: FrameShop Configurations Screen
Rotation on Openings: FrameShop Configurations Screen
More like this
Backups and Overcuts: FrameShop Configurations Screen
Backups and Overcuts: FrameShop Configurations Screen
More like this
90 Degree Outside Configurations: FrameShop Configurations Screen
90 Degree Outside Configurations: FrameShop Configurations Screen
More like this
Oval Rotation on Outside: FrameShop Configurations Scree
Oval Rotation on Outside: FrameShop Configurations Scree
More like this