Interior Overcut: FrameShop Configurations Screen

Interior Overcut

Interior Overcut

The Interior Overcut is where the cut continues into the corner before retracting the blade from the fallout of the opening, such as when cutting a French Stair.

Interior Cuts cut into the fallout of the opening, not the matboard.

The Interior Overcut Field Controls Where the Blade Continues into the Fallout Before Retracting the Blade on the Interior Cuts of Non-Oval Openings

Select the Bevel Type for the Interior Overcut to be Edited:

Select the Bevel Type for the Interior Overcut to be Edited:
Interior Overcut on Openings This is viewed from the front of the mat. Select this topic to see information on editing the Interior Overcut on Openings. Normal Bevel Reverse Bevel Normal Bevel-Front of Mat Reverse Bevel-Front of Mat	The Interior Overcut Field Controls Where the Blade Continues into the Fallout Before Retracting the Blade on the Interior Cuts of Non-Oval Openings
Interior Overcut on Drops This is viewed from the front of the mat. Select this topic to see information on editing the Interior Overcut on Drops. Normal Drop Reverse Drop Normal Drop-Front of Mat Reverse Drop-Front of Mat
Interior Overcut on the Outside This is viewed from the front of the mat. Select this topic to see information on editing the Interior Overcut on the Outside. Outside Outside-Front of Mat
Interior Overcut on V-Grooves This is viewed from the front of the mat. Select this topic to see information on editing the Interior Overcut on V-Grooves. V-Grooves