This FrameShop Online Help System is for an older Version of FrameShop.
The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw
If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.
What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ
FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw
Cartridge Type Examples: FrameShop Configurations Screen
Cartridge Type Examples | |
---|---|
The examples below display the different Cartridges that can be selected from the Cartridge Type Tabs. Take note that there is a separate configuration for cutting from the front (Normal Bevel - Front of Mat) and cutting from the back (Normal Bevel). Note: Not all cartridges are available for all CMC models. | Cartridge Type Examples |
45 Degree CartridgeThe 45 Degree Cartridge cuts a 45° bevel into the matboard, and includes the following Bevel Types:
| 45° Degree Cartridge Example |
45 Degree + CartridgeThe 45°+ Cartridge (45° Plus Cartridge) cuts a 45° bevel into thicker matboard such as 8-ply, and includes the following Bevel Types:
| |
52 Degree CartridgeThe 52 Degree Cartridge cuts a 52° bevel into the matboard, and includes the following Bevel Types:
| |
90 Degree CartridgeThe 90 Degree Cartridge cuts a 90° opening into the matboard, displaying no bevel, and includes the following Bevel Types:
| |
Deboss CartridgesThe Deboss Cartridges press into the matboard to create a subtle design. It is applied to the front* of the mat, and anything else on that layer will also be cut from the front. It includes the following Tool Cartridges:
| |
Pen CartridgeThe Pen Cartridge holds a pen to the matboard to draw lines or other objects onto the matboard. It is applied to the front* of the mat, and anything else on that layer will also be cut from the front. You can have up to nine different pens defined, and each pen has a separate set of configurations. It includes the following Tool Cartridges:
| |
Vinyl CartridgeThe Vinyl Cartridge cuts designs into sheets of Vinyl which have been temporarily adhered to the matboard. It is cut from the front* of the mat, and anything else on that layer will also be cut from the front. | |
Crease CartridgeThe Crease Cartridge perforates the material to make folding it easier when making Boxes. It is applied to the front* of the mat, and anything else on that layer will also be cut from the front. | |
*Cut From Front can either be selected on the Cutting Preview or will be automatically selected if there is a cut-from-front element on the current layer being cut, such as a Deboss or V-Groove. This will force it to cut all openings on that layer from the front. |
Bevel Type Examples | |
---|---|
See Bevel Type Examples for examples of the different bevel types that the bladed cartridges can cut. |