View Source

Selecting the 45° Blade Cartridge

The 45° Blade Cartridge is the default blade cartridge.
- The 45° Blade Cartridge does not support Blade Depths above 16.

note

Click on the opening.
Click on the Properties Tab.
Click the Cartridge Icon on the desired layer.

Click on the opening.
Click on the Properties Tab.
Click the Cartridge Icon on the desired layer.

For Additional Information: See 45 Degree Plus Cartridge for information on cutting Blade Depths above 16.

FrameShop 7x > Selecting the 45 Degree Cartridge in the Editor > 45DegreeCartSelect70800.png

Template Object

note

Select the 45° Bevel Cartridge.

Select the 45° Bevel Cartridge.

The only Blade Cartridges that can be selected on Templates are the 45°, 52° and 90° cartridge.

For Additional Information: To change the Template to a non-blade cartridge, see Changing the Template to Deboss/Pen/Vinyl in the Template Properties.

FrameShop 7x > Selecting the 45 Degree Cartridge in the Editor > CartridgeSelectTemplate70800.png

Non-Template Object

note

Select the 45° Bevel Cartridge.

Select the 45° Bevel Cartridge.

If the selected object is a non-template, all of the licensed applicable cartridges will be displayed.
- The cartridges not available in the current scenario are either grayed out or not displayed.

FrameShop 7x > Selecting the 45 Degree Cartridge in the Editor > CartridgeSelectNonTemplate70800.png

New Cartridge Selected

note

The current layer displays the selected cartridge.

The current layer displays the selected cartridge.

FrameShop 7x > Selecting the 45 Degree Cartridge in the Editor > 45DegreeCartSelect70800.png

Go to the Cut Preview

note

Go to the Cut Preview to Cut the mat.
Insert the 45° Blade Cartridge when prompted.

Go to the Cut Preview to Cut the mat.
Insert the 45° Blade Cartridge when prompted.

FrameShop 7x > Selecting the 45 Degree Cartridge in the Editor > BladeCartridgePrompt45Z1-70800.png