">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Opening Has a Flare

  • If the Object has a Flare, Decrease the Rotation.

  • For Additional Information: See Troubleshooting Utility for information on adjusting for a Swoop or Flare in a Non-Oval.

 Flare on Opening Definition

A Flare in an Opening is where the corners Curve Away from the opening.

If the Opening has a Flare, Decrease the Rotation.

The Rotation controls for Swoops and Flares/wiki/spaces/FrameShop8x/pages/1942511158in Openings.

 How to Adjust the Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

  • No labels