You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 15 Next »
The Cut Current Mat button will bring the current design to the Cutting Preview Screen to Cut.
Have the Traced design open in Trace.
Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply a Non-Blade Tool on the CMC.
The Set Bevels Tab in Trace contains the tools needed to Trace the design.
Click on the Cut Current Mat button.
The design opens up on the Cutting Preview Screen.
Optionally, click File > Send to CMC.
This will send the current design to the cut preview.
