This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Zoom Controls

There are a number of Zoom buttons available for changing the project view on the Cutting Preview Screen.

Zoom Window

Use Zoom Window to Zoom into a specified area of the screen. 

Click the Zoom Window button. 

Draw a box around the desired area on the screen. 

The screen zooms in to that area.

Zoom In

Zoom In about 50% on the screen.

Click the Zoom In button. 

The screen zooms in about 50%. 

Zoom Out

Zoom Out about 50% on the screen.

Click the Zoom Out button. 

The screen zooms out about 50% unless the screen is already at the full screen view.  

Zoom All

Zoom All to view the entire screen.

Click the Zoom All button.

The entire drawing zooms out to the full screen view.

  • No labels