This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

FrameShop Visualize Getting Started Manual

These instructions will walk through setting up and calibrating the camera. Read through the manual that came with your camera to make sure you are using the correct cabling. Some cameras require USB 3 in order to produce the highest resolution.

Set Up the Camera

Select this topic to see information on Setting Up the Camera.

Check Software Measurements

Select this topic to see information on Checking the Software Measurements.

Color Profiles

Select this topic to see information on Color Profiles.

Visualize Walk-Through

Select this topic to see information on Visualize Walk-Through.

Zoom Lens Calibration

For information on using a zoom lens camera, see the Camera Zoom Calibration document which can be found on the Knowledge Base site.

  • No labels