This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Center Objects Button

Use the Center Objects button to center the selected object(s) both horizontally and vertically onto the mat.  

Select the desired object.

Click the Center Objects button. 

The object is centered both horizontally and vertically onto the mat.

Centering a Group of Openings

Select the desired objects.

Click the Center Objects button.

The selection spacing is preserved, and the group is centered onto the mat with the center of the selection located at the center of the mat.

See Also: The Alignment Tab for additional centering and alignment functions, such as the Center Button, which performs the same function as the Center Objects Button.

  • No labels