This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

Thickness: Crease

Enter the thickness for the material the box is being cut from in the Thickness field.

For thicknesses of 1/8" and above, it will use the Crease Tool to create the fold lines when cutting the box.

The software will also calculate where the fold lines should be based on the thickness and the box template selected.

Override Thickness Auto-Adjust

Optionally, click the Override Thickness Auto-Adjust checkbox to retain the currently selected tool regardless of the thickness value entered.

  • No labels