This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of banner Go to start of banner

Vector: FrameShop Definition

Skip to end of metadata

Created by dani.simmonds, last modified on Feb 27, 2020

Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Vector
A Vector design in Trace is composed of paths which can be used to dictate the bevel type, cartridge type, configuration used, and general cutting information for the CMC.

No labels