">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 5 Current »

How to Make an Isosceles Trapezoid Using the #507: Pennant

  • These instructions will show you how to make an Isosceles Trapezoid using the #507: Pennant template.

IsoscelesDone800.png

  • Click New Mat Design on the FrameShop Main Page.

  • Click Cancel on the New Openings Screen.

  • On the Openings Tab, bring the template #507: Pennant template onto the Editor.

  • Click on the Properties Tab to edit it.

  • Enter the desired size for the #507: Pennant opening.

IsoscelesSize800.png

  • Click on the Parameters tab.

  • We will be designing the shape sideways and then rotating it.

  • Change the Parameters as desired.

  • For this example we changed:

    • Tail is 0

    • Taper is 1.25.

IsoscelesParams800.png

  • Rotate the opening to the desired orientation.

IsoscelesRotate800.png

  • Our Isosceles Trapezoid design is now completed.

IsoscelesDone800.png
  • No labels