This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Add Crease

Use the Crease cartridge button to add a creased object to the design which makes folding the sides of a box easier.

The Crease cartridge perforates the material to make folding it easier when making boxes.   

Click the Add Other Openings button.

Click on Add Crease. 

If an object is selected when clicking Add Crease, the Crease Offset window will open. 

Enter the distance away from the current opening to place the Crease.

Crease object will be placed.

Set the Default for the Crease Cartridge/Box Defaults

The default setting for the Box Defaults can be set in the Admin > Editor section.

Edit the Crease

Click on a Creased object and click on the Properties Tab to edit the individual proprietary adjustments available for Crease objects.

Box Manual

For more information on using the Crease tool, see the Getting Started Box Manual.

  • No labels