">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 20 Next »

  • The 52° Normal Bevel Open V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement a specified distance apart.

  • Both the matboard core and the lower layer matboard surface are visible from the front.

  • The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

    • First Cut: Cuts the Interior cut into the Fallout Clockwise: Normal Bevel Drop.

    • Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise: Normal Bevel Opening.

      • The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove.

      • However, it cannot be chosen as a standalone bevel type within the Design Editor.

  • The purple 52° Blade Cartridge is labeled “52” with a 52° Angle Symbol on the end.

  • Select Normal Drop or Normal Drop-Front of Mat from the Current Bevel Type Dropdown Control to edit the interior cut.

  • Select Normal Bevel or Normal Bevel-Front of Mat from the Current Bevel Type Dropdown Control to edit the exterior cut.

52OpenVGrooveCartridge70800.pngEnd52Cartridge70800.png
  • No labels