Skip to end of metadata
Go to start of metadata
The 45° Normal Bevel Opening is created by cutting into the matboard surface with the blade angled at 45°, thereby slanting the bevel away from the matboard surface, displaying the matboard core from the front. The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. The 45° Blade Cartridge does not support Blade Depths above 16. The black 45° Blade Cartridge is labeled “45” with a 45° Angle Symbol on the end. Select Normal Bevel or Normal Bevel-Front of Mat from the Current Bevel Type Dropdown Control to edit this configuration.
|   |