">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 23 Next »

  • A 45° Normal Bevel Closed V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement.

  • The matboard is cut halfway through its thickness, revealing the core from the front.

  • The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

    • First Cut: Cuts the Interior cut into the Fallout Clockwise.

    • Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise.

  • The 45° Blade Cartridge does not support Blade Depths above 16.

  • Select V-Groove from the Current Bevel Type Dropdown Control to edit this configuration.

45MetalBevelVGroove70800.png
  • No labels