Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 51
Next »
The Exterior Backup for V-Grooves controls where the Blade Plunges into the Matboard (not the Fallout) on the Exterior Cuts of the Outside Cut of the V-Groove. The Exterior Cut is where the Blade Plunges/Retracts from the Matboard (not the Fallout). If the Exterior Backup on the Outside Cut of the V-Groove is cut Too Long, Decrease the Exterior Backup. If the Exterior Backup on the Outside Cut of the V-Groove is cut Too Short, Increase the Exterior Backup.
🛠️ Click the Plus or Minus button several times on the desired field, do a test cut and continue adjusting until satisfied.
|   |