A Swoop is where the corners Curve Inward toward the opening on the inside/outside cut of the V-Groove. If the Outside cut of the V-Groove has a Swoop, Decrease the Outside Rotation. If the Inside cut of the V-Groove has a Swoop, Increase the Inside Rotation. A Flare is where the corners Curve Away from the opening on the inside/outside cut of the V-Groove. If the Outside cut of the V-Groove has a Flare, Increase the Outside Rotation. If the Inside cut of the V-Groove has a Flare, Decrease the Inside Rotation.
|    |
Click the Plus or Minus button several times on the desired field, do a test cut and continue adjusting until satisfied.