">

Skip to end of banner Go to start of banner

Plunge Count Toggle: Cut Preview Options

Skip to end of metadata

Created by dani.simmonds , last modified on Sept 30, 2024

Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

Plunge Count Toggle: Cut Preview Options

Use the Plunge Count toggle to automatically pause for a Blade Change after the specified Number of Blade Plunges entered on the Configurations screen.
- You may have to set the Cut Preview Screen to full screen to view this toggle.

Contents:

Click the Plunge Count toggle On.
The system will pause for a Blade Change after the specified Number of Blade Plunges.

For Additional Information:
See Set Number of Blade Plunges in the Configurations screen.
See Options > Enable Plunge Counts on the Cut Preview to toggle on the Plunge Count on the Cut Preview menu.

Plunge Count Definition

The Plunge Count controls the number of Blade Plunges for each Blade Cartridge before pausing for a Blade Change.

If it doesn’t prompt for a Blade Change during the cut, enter the Plunge Count value and select Plunge Count on the Cut Preview.

If you don’t want it to prompt for a Blade Change during the cut, unselect Plunge Count on the Cut Preview.

See: Plunge Count Function

See: Plunge Count Value Configurations

No labels