">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

LetterMat Min Height

  • The Original LetterMat Height is displayed in the Min Height field. 

  • This is the size the LetterMat was originally drawn and tested.

  • Always do a test cut first if cutting smaller than the Minimum Size.

  • Cutting LetterMats smaller than the Minimum Size is not recommended, and may give unexpected results.

  • LetterMats can be Debossed or Penned much smaller than they can be cut.

 Parameters Definition

The Parameters are set of specified variable characteristics related to the selected object that can be modified through the accompanying fields in the Design Editor.

For example, the Chamfer is the symmetrical angled surface at the corner of the Template.

In the Design Editor, the Template Parameter Map displays a diagram describing each parameter field for the current Template.

 Keep Aspect Ratio Definition

Keep Aspect Ratio keeps the CutArt, Image, LetterMat, etc. Height and Width proportionate to avoid distortion in the Design Editor.

See: CutArt Properties

See: Image Properties

See: LetterMat Properties

See: TTF Properties

LetterMatMinHeight70800.png

  • No labels