">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 16 Next »

Box Templates and Dimensions

  • Use the Box Dimensions section to select the Box Template and enter the size and thickness.

Box Thumbnail

  • A thumbnail of the current Box Template is displayed above the box template selection dropdown control.

  • Select the desired box template from the Box Template dropdown control.

  • The thumbnail for the selected box template is displayed.

Box Template

  • There are several box Templates available.

  • Select the desired box template from the Box Template dropdown control.

Box Dimensions

  • When the desired box template is selected, the fields pertinent for the selected template will be displayed.

  • Enter in the desired Sizes, such as Length, Width, Depth and Thickness of the box. 

    • The example box displayed here only has Width because it controls both the Width and Height because it is a square corner protector.

Box Depth

  • Enter the Depth of the box to be made in the Depth field.

Box Thickness

  • The thickness field controls which Creasing Tool is used to create the creases when cutting the box.

  • The software will also calculate where the fold lines should be based on the thickness and the box template selected. 

  • Enter the thickness for the material the box is being cut from in the Thickness field.

  • Default Settings: See Admin > Editor for the default Thickness and Tool Threshold settings for the Box/Crease Cartridge.

Thickness: Deboss

  • Enter the thickness of 3/32” and below for the material the box is being cut from in the Thickness field to use the Deboss cartridge to create fold lines.

  • Default Settings: See Admin > Editor for the default Thickness and Tool Threshold settings for the Box/Crease Cartridge.

 Deboss Definition

The Deboss cartridge stylus presses onto the surface of the matboard to create a subtle design.

There are three Deboss stylus sizes: Wide, Medium, Thin.

In addition to Template Shapes, you can also Deboss CutArts, LetterMats and TTFs.

See: Add Deboss Opening Function

See: Deboss Configurations

See: Deboss Thin Definition

See: Deboss Medium Definition

See: Deboss Wide Definition

Thickness: Crease

  • Enter the thickness of 1/8” and above for the material the box is being cut from in the Thickness field to use the Crease cartridge to create fold lines

  • Default Settings: See Admin > Editor for the default Thickness and Tool Threshold settings for the Box/Crease Cartridge.

 Crease Definition

The Crease Cartridge is used to apply Crease marks that are used to assist in folding the thicker finished Box.

See: Add Crease Opening Function

See: Crease Cartridge Configurations

Override Thickness Auto-Adjust

  • Optionally, click the Override Thickness Auto-Adjust checkbox to retain the currently selected tool regardless of the thickness value entered.

  • No labels