">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 37 Next »

Add Pen Opening

  • The Pen Cartridge is used to draw onto the surface of the matboard on the CMC to create a design.

  • For Additional Information: See Install Pen for information on calibrating each of the pens for use in the Pen Cartridge.

  • Default Settings: See Admin > Editor for the default settings for the Pen Cartridge.

 Pen Definition

The Pen Cartridge is used to draw onto the surface of the matboard on the CMC to create a design.

You can Pen Designs, CutArts, LetterMats and TTFs.

PenCartridgeConfig70800.jpg

See: Pen Cartridge Configurations

 Install Pen Definition

The Install Pen Utility calibrates the Pen Tool for use on the CMC.

The Pen Cartridge draws onto the surface of the matboard to create a design. In addition to templates, you can also Pen CutArts, LetterMats and TTFs.

Use the Install Pen utility to calibrate the system for different Pens.

See: Install Pen: Set the Pen Depth Setting for CMC Z1

See: Install Pen: Set the Pen Depth Setting for CMC Z (9000z) and 9000

  • The Pen is placed on the Editor.

  • For Additional Information: See Pen Properties to edit the individual proprietary adjustments available for the Pen. 

  • No labels