">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

Version 1 Next »

New Openings Single: Outside Size

  • If entering Opening size first, it automatically calculates the Outside size when tabbing out of the Borders field.  

  • If entering Outside dimension first, it automatically calculates the Opening size when tabbing out of the Borders field.

  • Enter the outside Width. 

  • Enter the outside Height.

  • Default Settings: See Admin > Defaults to set the default for displaying the Opening Size First or the Outside Size First on the New Openings Screen.

 Outside Bevel Definition

The Outside Bevel is created by cutting into the fallout surface with the blade angled at 45°/52°, thereby slanting the bevel under the fallout surface. The matboard core is not visible from the front.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Select Outside or Outside-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

See: 45 Degree Outside Configurations

See: 45 Degree Plus Outside Configurations

See: 45 Degree Front Outside Configurations

See: 52 Degree Outside Configurations

See: 90 Degree Outside Configurations

 Sizes Button Definition

The Sizes Button displays the Recent and Standard sizes. 

Recent lists the last ten sizes entered.

Standard lists Standard sizes associated with the current unit of measurement.

 Swap Button Definition

The Swap Button switches the values between the Width and Height fields.

  • No labels