">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 9 Next »

Folded Flag Using the #504: Triangle Template

  • These instructions will show you how to create a folded flag opening using the #504: Triangle Template.

504FoldedFlagDone800.png

  • Click New Mat Design on the FrameShop Main Page.

  • Click Cancel on the New Openings Screen.

  • On the Openings Tab, bring the template #504: Triangle template onto the Editor.

  • Click on the Properties Tab to edit it.

  • Enter the desired size for the #504: Triangle opening.

504FoldedFlagStart800.png

  • Click on the Reveals tab.

  • Select the top layer and change it to use the 90° cartridge.

    • This layer represents our outside cut for this design.

504FoldedFlag90outside800.png

  • Under Reveals, enter what you would like for the size of the borders.

  • Both of these layers will actually be cut onto the same layer.

    • The smaller triangle will be the opening, and the larger triangle will be the outside.

504FoldedFlagReveal800.png

  • Save the design.

  • When you cut it, do not select to Cut the Outside.

  • Instead, cut the Opening then without moving the mat, cut the Outside Layer on top of it.

504FoldedFlagCutPreview800.png

  • The Folded Flag using the #504: Triangle template is finished.

504FoldedFlagDone800.png

  • No labels