">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

How to Make a Parallelogram Using the #507: Pennant

  • These instructions will walk you through making a Parallelogram using the #507: Pennant template.

ParallelogramDone800.png

  • Click New Mat Design on the FrameShop Main Page.

  • Click Cancel on the New Openings Screen.

  • On the Openings Tab, bring the template #507: Pennant template onto the Editor.

  • Click on the Properties Tab to edit it.

  • Enter the desired size for the #507: Pennant opening.

IsoscelesSize800.png

  • Click on the Parameters tab.

  • We will be designing the shape sideways and then rotating it.

  • Change the Parameters as desired.

  • For this example we changed:

    • Tail is 0

    • Taper is 1.25.

IsoscelesParams800.png

  • Rotate the opening to the desired orientation.

IsoscelesRotate800.png

  • Copy and Paste the design onto the Editor so that we have two openings.

ParallelogramCopy800.png

  • Rotate the second opening so that it is in the opposite orientation of the first opening.

ParallelogramRotate800.png

  • Position the second opening so that it lines up with the original opening.

  • Move it so that one corner of the two openings meet.

    • Align the top right corners for the side angles to lean left.

    • Align the top left corners for the side angles to lean right.

ParallelogramLineUp800.png

  • Select both openings (Ctrl+A) and click the Group Selection button.

ParallelogramGroup800.png

  • The openings will merge together and create a single opening.

    • If it does not line up correctly, click Group Selection again, click on the background to unselect the opening and reposition them and repeat the steps.

  • Our Parallelogram design is now completed.

ParallelogramDone800.png
  • No labels