How Tosectionat:[HowTo...]">Check out our new How To section at: How To...

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 62 Current »

Bump Definition

  • A Bump in an Oval Opening is a Lump of material left behind where the cut started and ended.

 Oval Rotation General Definition

The Oval Rotation controls for Feathers or Bumps on an Oval Opening.

 Bumps Oval Rotation General Definition

A Bump in an Oval Opening is a Lump of material left behind where the cut started and ended.

If the Oval Opening has a Bump, Increase the Oval Rotation.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

See: Oval Rotation Configurations

See: Oval Rotation for Openings Configurations

See: Oval Rotation for Drops Configurations

See: Oval Rotation for the Outside Configurations

See: Outside Oval Rotation for V-Grooves Configurations

See: Inside Oval Rotation for V-Grooves Configurations

 Bumps in Opening Definition

A Bump in an Oval Opening is a Lump of material left behind where the cut started and ended.

If the Oval Opening has a Bump, Increase the Oval Rotation.

See: Oval Rotation Configurations

 Bump in Drop Definition

A Bump in an Oval Drop is a Lump of material left behind where the cut started and ended.

If the Oval Drop has a Bump, Increase the Oval Rotation.

See: Oval Rotation Configurations

 Bumps in the Outside Definition

A Bump in an Oval Outside is a Lump of material left behind where the cut started and ended.

If the Oval Outside has a Bump, Increase the Oval Rotation.

See: Oval Rotation Configurations

 Outside Oval Rotation on V-Grooves General Definition

The Outside Oval Rotation for V-Grooves controls for Bumps or Feathers on the Outside Cut of an Oval V-Groove.

 Outside V-Groove Bump Definition

A Bump in the Outside cut of an Oval V-Groove is a Lump of material left behind where the cut started and ended on the Outside cut of the Oval V-Groove.

If the Outside cut of the Oval V-Groove cuts with a Bump, Decrease the Outside Oval Rotation.

See: Outside Oval Rotation Configurations for V-Grooves

 Inside Oval Rotation on V-Grooves General Definition

The Inside Oval Rotation for V-Grooves controls for Bumps or Feathers on the Inside Cut of an Oval V-Groove.

 Inside V-Groove Bump Definition

A Bump in the Inside cut of an Oval V-Groove is a Lump of material left behind where the cut started and ended on either the Inside Cut of the Oval V-Groove.

If the Inside cut of the Oval V-Groove cuts with a Bump, Increase the Inside Oval Rotation.

See: Inside Oval Rotation Configurations for V-Grooves

 How to Adjust the Oval Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

  • No labels