How Tosectionat:[HowTo...]">Check out our new How To section at: How To...


Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 24 Next »

Outside Rotation on V-Grooves Definition

  • A Swoop on the Outside cut of the V-Groove is where the corners Curve Inward toward the opening.

    • If the Outside cut of the V-Groove cuts with a Swoop, Decrease the Outside Rotation.

 Swoop in the Outside Cut of a V-Groove Full Definition

A Swoop on the Outside Cut of the V-Groove is where the corners Curve Inward toward the opening.

If the Outside cut of the V-Groove cuts with a Swoop, Decrease the Outside Rotation.

The Outside Rotation on V-Grooves controls for Swoops and Flares in the Outside cut of the V-Grooves.

See: Outside Rotation on V-Grooves Configurations

  • A Flare on the Outside cut of the V-Groove is where the corners Curve Away from the opening.

    • If the Outside cut of the V-Groove cuts with a Flare, Increase the Outside Rotation.

 Flare in the Outside Cut of a V-Groove Full Definition

A Flare on the Outside Cut of the V-Groove is where the corners Curve Away from the opening.

If the Outside cut of the V-Groove cuts with a Flare, Increase the Outside Rotation.

The Outside Rotation on V-Grooves controls for Swoops and Flares in the Outside cut of the V-Grooves.

See: Outside Rotation on V-Grooves Configurations

 How to Adjust the Configurations

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

  • No labels