Skip to end of metadata
Go to start of metadata
Attaching Air Lines: BA-02-##### |
---|
| |
| |
| |
| |
| |
| |
Plug in the other Air Line with the Red Connector of the “Y” into the right side of the Air Regulator. Plug the Air Line coming off the Left side of the Air Regulator into your main air supply via 1/4” NPT female connector, or the quick disconnect, whichever type you purchased. Your air compressor should have at least 100 - 120 PSI. Shown below is the black threaded fitting connected to a 1/4” NPT female adaptor. It is suggested that Teflon tape be used on the threads of the black fitting to reduce possible air leakage. Strap your Air Regulator, glass bowl down to the left large wall bracket or left stand side with cable ties provided in your Tool Kit, making sure not to crimp any of the Air Lines. Turn on the Air. Continue to Calibration and Alignment of the Straight Line Trimmer.
| |