You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 4 Next »
The material folds over and tucks into tabs to form the ends.
The lid folds over and tucks into the base.
This is cut from one piece of material.
Cut out the box at the desired dimension.
Fold the box sections along the creased edges.
Fold in the inner flaps of the box.
Fold the end over the inner flaps of the box.
Tuck the tabs of the end of the box into the slots in the bottom of the box, securing it in place.
Repeat the steps for the other side of the box.
Fold in the two tabs in the center.
Fold the top part of the box over the base.
Close the box.
The box is completed.
