Cut Mode Set Advanced

Set Advanced Options: Cut Mode
Select the desired Cut Mode for the CMC Z1, Z (9000z), 9000 and 8000+. For Additional Information: Select Options Menu > Cut Outside to cut the outside of the mat. See /wiki/spaces/FrameShop8x/pages/1942506497 to turn on/off the Outside cut. See Advanced Outside Options: Enable Outside Cut to turn on/off the Outside cut. Default Settings: See Admin > Editor for the default settings for Cutting the Outside. See Admin > Cutting for the default settings for the Advanced Options. See Admin > Cutting for the default settings for the Cut Mode. See Admin > Cutting for the default settings for 90 Degree Outside. Click the Set Advanced Options button on the Cut Preview to access the Advanced Outside Options.
Make the desired selection from the Cut Mode dropdown control. Click OK.
The selected Cut Mode will display on the Outside Cut Options.

Cut Mode
Cut Mode Off Select this topic to get information on having the Cut Mode Off.
Cut Mode Shared Edge Select this topic to get information on having the Cut Mode Shared Edge.
Cut Mode Full Select this topic to get information on having the Cut Mode Full.
Cut Mode As Designed Select this topic to get information on having the Cut Mode As Designed.

Outside Cut Options
The same Cut Mode selections are available on the Outside Cut Options Dropdown Control on the Cut Preview screen. Select the desired Outside cut option from the Outside Cut Options dropdown control.

Search