How Tosectionat:[HowTo...]">Check out our new How To section at: How To...

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 32 Next »

Alignment Buttons

  • Use the Alignment buttons to arrange the position of objects in relation to the Mat or to the Bounding Rectangle of selected objects.

 Bounding Rectangle Definition

The Bounding Rectangle is a dotted or invisible rectangle that encompasses the outermost boundaries of the selected object(s) in Designer and Trace, and includes Control Points which can be used to edit the object.

BoundingRectangle800.png

See: Control Points Definition

Centering Buttons

  • The first row of Alignment Buttons are the Centering buttons, which align the opening to the Center of the Mat. 

  • If several objects are selected, they are centered as a locked group.

  • Center Openings Horizontally to Mat

  • Center Openings Horizontally and Vertically to Mat

  • Center Openings Vertically to Mat

Center Openings Horizontally to Mat 

  • Center Openings Horizontally to Mat aligns the objects Horizontally to the Center of the Mat.

  • Select the desired object(s).

  • Click Center Openings Horizontally to Mat.

  • The object is centered to the mat Horizontally.

Center Openings Horizontally and Vertically to Mat 

  • Center Openings Horizontally and Vertically to Mat aligns the objects Horizontally and Vertically to the Center of the Mat.

  • Select the desired object(s).

  • Click Center Openings Horizontally/Vertically to Mat.

  • The object is centered to the mat both Horizontally and Vertically.

Center Openings Vertically to Mat

  • Center Openings Vertically to Mat aligns the objects Vertically to the Center of the Mat.

  • Select the desired object(s).

  • Click Center Openings Vertically to Mat.

  • The object is centered to the mat Vertically.

Horizontal Alignment Buttons

  • The middle row of the Alignment Buttons are the Horizontal Alignment Buttons, which align the selection of openings Horizontally within their Bounding Rectangle.

  • These buttons activate when two or more objects are selected.

  • The Bounding Rectangle is shown for illustration.

  • Align to Left Edge

  • Align to Center

  • Align to Right Edge

 Bounding Rectangle Definition

The Bounding Rectangle is a dotted or invisible rectangle that encompasses the outermost boundaries of the selected object(s) in Designer and Trace, and includes Control Points which can be used to edit the object.

BoundingRectangle800.png

See: Control Points Definition

Align to Left Edge

  • Align to Left Edge aligns the objects Horizontally to the Left Edge of the Bounding Rectangle of the selected openings. 

  • Select the desired objects.

  • Click Align to Left Edge. 

  • The objects align to the Left Edge of the Bounding Rectangle.

  • The Bounding rectangle is shown for illustration.

 Bounding Rectangle Definition

The Bounding Rectangle is a dotted or invisible rectangle that encompasses the outermost boundaries of the selected object(s) in Designer and Trace, and includes Control Points which can be used to edit the object.

BoundingRectangle800.png

See: Control Points Definition

Align to Center

  • Align to Center aligns the objects Centered Horizontally within the Bounding Rectangle of the selected openings.

  • Select the desired objects.

  • Click Align to Center.

  • The objects align to the Center of the Bounding Rectangle.

  • The Bounding rectangle is shown for illustration.

 Bounding Rectangle Definition

The Bounding Rectangle is a dotted or invisible rectangle that encompasses the outermost boundaries of the selected object(s) in Designer and Trace, and includes Control Points which can be used to edit the object.

BoundingRectangle800.png

See: Control Points Definition

Align to Right Edge

  • Align to Right Edge aligns the objects Horizontally to the Right Edge of the Bounding Rectangle of the selected openings. 

  • Select the desired objects.

  • Click Align to Right Edge.

  • The objects align to the Right Edge of the Bounding Rectangle.

  • The Bounding Rectangle is shown for illustration.

 Bounding Rectangle Definition

The Bounding Rectangle is a dotted or invisible rectangle that encompasses the outermost boundaries of the selected object(s) in Designer and Trace, and includes Control Points which can be used to edit the object.

BoundingRectangle800.png

See: Control Points Definition

Vertical Alignment Buttons

  • The bottom row of the Alignment Buttons are the Vertical Alignment Buttons, which align the selection of openings Vertically within their Bounding Rectangle.

  • These buttons activate when two or more objects are selected.

  • The Bounding Rectangle is shown for illustration.

  • Align to Bottom Edge

  • Align to Middle

  • Align to Top Edge 

 Bounding Rectangle Definition

The Bounding Rectangle is a dotted or invisible rectangle that encompasses the outermost boundaries of the selected object(s) in Designer and Trace, and includes Control Points which can be used to edit the object.

BoundingRectangle800.png

See: Control Points Definition

Align to Bottom Edge

  • Align to Bottom Edge aligns the objects Vertically to the Bottom Edge of the Bounding Rectangle of the selected openings.

  • Select the desired objects.

  • Click Align to Bottom Edge.

  • The objects align to the Bottom Edge of the Bounding Rectangle.

  • The Bounding Rectangle is shown for illustration.

 Bounding Rectangle Definition

The Bounding Rectangle is a dotted or invisible rectangle that encompasses the outermost boundaries of the selected object(s) in Designer and Trace, and includes Control Points which can be used to edit the object.

BoundingRectangle800.png

See: Control Points Definition

Align to Middle

  • Align to Middle aligns the objects Vertically to the Middle within the Bounding Rectangle of the selected openings. 

  • Select the desired objects.

  • Click Align to Middle.

  • The objects align to the Middle of the Bounding Rectangle.

  • The Bounding rectangle is shown for illustration.

 Bounding Rectangle Definition

The Bounding Rectangle is a dotted or invisible rectangle that encompasses the outermost boundaries of the selected object(s) in Designer and Trace, and includes Control Points which can be used to edit the object.

BoundingRectangle800.png

See: Control Points Definition

Align to Top Edge

  • Align to Top Edge aligns the objects Vertically to the Top Edge of the Bounding Rectangle of the selected openings.

  • Select the desired objects.

  • Click Align to Top Edge.

  • The objects align to the Top Edge of the Bounding Rectangle.

  • The Bounding Rectangle is shown for illustration.

 Bounding Rectangle Definition

The Bounding Rectangle is a dotted or invisible rectangle that encompasses the outermost boundaries of the selected object(s) in Designer and Trace, and includes Control Points which can be used to edit the object.

BoundingRectangle800.png

See: Control Points Definition

  • No labels